Why Is My Roomba So Loud?

Why is My Roomba So Loud?

"As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links"

Are you confused and wondering why my Roomba is so loud? Then, eliminate the unwelcome noise and welcome a quieter, smoother cleaning experience with your favorite Roomba.

Here you’ll discover what’s causing your Roomba to be louder than normal and how to lessen the noise in minutes!

If there is a lot of filth and dust on the brushes or extractors, Roomba might make a lot of noise. The issue may also stem from the vacuum impeller or the extractors rubbing against one another. You should also inspect the floor’s surface.

Let’s find out more about the potential causes of why Roomba is so loud and then pinpoint the source of them.

You may also read: Why Is My Roomba Making Clicking Noise?

Why is my Roomba so loud?

Why is my Roomba so loud?

Some possible reasons for the sounds your Roomba is producing are listed below.

Here is the list of reasons:-

  • Due to damaged wheels 
  • Due to problematic floor 
  • Due to a damaged head module  
  • Due to Clogged brushes and filters
  • Due to the incorrect positioning of extractors

Let’s discuss each problem or reason in little detail to understand your cheeky Roomba dude better.

Step-by-Step Guide: Resolving Roomba’s Random Lighting Behavior.

Problem1. Damaged wheels

Worn or broken wheels might prevent your Roomba from moving freely and easily. As the Roomba travels over the floor, this might cause more friction and noise. 

Fixing this problem often involves checking for and replacing broken wheels.

Problem 2. Problematic flooring

Uneven or slippery floors, loose tiles, or extensive grout lines may all prevent the Roomba from cleaning effectively.

Related: Will Roomba Work On Uneven Floors?

The more deep work it has to do to get around these obstacles, the more noise it may make. If there are problems with the flooring, fixing them will help reduce noise.

Problem 3. Damaged Head Module

The Roomba’s motor and brushes are housed in its “head module,” which might be damaged in this scenario.

Excessive noise during activity is possible if any of these parts are defective or malfunctioning. The head module may need servicing or replacement in such instances.

Problem 4. Filter Or Brush Debris

Your Roomba will make a lot of noise and won’t be able to clean up any messes if the brush or filter is clogged with particles.

Long hair is a contributing factor. The longer your hair is, the greater the risk it may clog the Roomba’s brush and prevent it from cleaning. You may fix this by using scissors to remove the blockage.

Problem 5. Extractors Positioned Incorrectly

Make that the extractors on your iRobot Roomba are in the appropriate slots. They might be making a lot of noise if they are installed improperly. The extractors should be replaced if they are broken or not functioning properly.

Quick and Simple: Resetting the iRobot Roomba i7

How Can I Fix Roomba Loud Noise?

Why is my Roomba so loud?

If your Roomba is making an irritating loud noise, and you don’t know why it is my Roomba so loud, you should probably have a look at it or attempt to track it down so you can quiet it down.

If you implement my suggestions, you will succeed. So let’s start with some fixing up.

Solution 1. Clean The Cleaning Head

Your Roomba’s cleaning head may be the source of the loud noise it is making.

Check and maintain the cleaning head instead of only cleaning the dirt collectors in the prior method.

Related: How Long Does A Roomba Take To Clean?

If you want to keep your Roomba’s cleaning head in top shape, read the guidelines below.

  1. Flip the Roomba over to access the cleaning head screws.
  2. Remove the screws and take out the cleaning head using the latches.
  3. The cleaning head’s storage space is the next place to check for dust.
  4. To remove the debris from the cleaning head, just use a cloth to pick it up.
  5. Put back together your Roomba by reinstalling all of its parts.
  6. After you’ve put the cleaning head back together, restart the Roomba to see whether the volume is still higher than normal.
  7. If it didn’t quiet your Roomba, we’d go on to the next option.

Solution 2. Dust Off The Filter

If you don’t clean the dust filter on your Roomba robot regularly, it might get fairly clogged with dust. It is strongly advised to make filter cleaning a routine task for optimal performance and to mitigate any related problems.

Consider that the Roomba’s filter was not designed to be cleaned in a sink full of water. After giving the trash can lid a thorough shake, any leftover dust should be collected on a napkin.

Here’s how to maintain the filter’s cleanliness:

  1. First, detach the Roomba’s safety lock from the floor.
  2. Take out the filter, shake it well, and the dust should fall out.
  3. After two months of regular use, you should probably get a new one. If it wasn’t successful, try something else.

Solution 3. Clean The Brushes And Extractors

First, make sure your brushes and extractors are clean. You should check and clean these parts of your Roomba since they may be worn out or clogged.

To clean your Roomba’s brushes and extractors, just follow these steps:

  1. Flip your Roomba on its side.
  2. Push the frame of the extractor up until it is fully open.
  3. Grab the filter and pull it toward you until it comes out.
  4. Clean the dust out of the ends of the extractor, which are on both sides.
  5. Check your Roomba’s brushes and clean them well. You must be able to watch them when you turn the robot upside down.
  6. Put the ejector together and pull down on the frame until it locks.

It’s important to remember that you should clean your brushes and extractors once a week and replace them every six to twelve months.

How to Maximize the Lifespan of Your Roomba: Tips and Tricks

Solution 4. Replace the vacuum impeller

Your Roomba’s vacuum rotor is a small, powered fan that provides pressure for the trash it picks up.

It may have broken down or ceased operating, meaning dust won’t be gathered correctly, building up in the wrong area to make more noise.

You should take your robot in for service since the vacuum impeller is not user-replaceable.

Solution 5. Turn on “Quiet Drive”

Roomba has a “Quiet drive” option that may be used if programmed to clean just certain rooms or areas of the home regularly.

It muffles Roomba’s sounds as it cleans but is limited to certain cleaning schedules and paths.

In addition to reducing the noise your robot makes while cleaning, enabling this feature will save even more energy.

Solution 6. Check the warranty details

A loud Roomba isn’t always straightforward to fix. The suction motor on your Roomba might be failing, or the suction propellers could get blocked. These problems often make a horrible grinding noise and are very inefficient.

Whether the issue seems to be with the motor, review the warranty to see whether it’s covered. The limited warranty might pay for repairs to your robot if the problem occurs during the first year. 

Get in touch with iRobot (or another manufacturer; warranties vary) to see about sending back your current equipment and receiving a replacement.

Some users asked why our Roomba was making noise while charging. For those, I wrote a separate article that you shouldn’t overlook.  Why roomba making noise while charging?

Comparing the Noise Levels of Different Roomba Models

Let me help you to make a purchase decision by sharing the comparison table of noise levels of different Roomba models so you can get an idea.

Here is the table that can assist you in getting an idea of the noise level.

Roomba ModelNoise Level (Decibels)Quieter or Louder?
Roomba i Series62 dBQuieter
Roomba s9 Series67 dBQuieter
Roomba e5 Series71 dBLouder
Roomba 900 Series68 dBQuieter
Roomba 600 Series65 dBQuieter
Roomba 800 Series70 dBLouder

Please note that the noise levels listed in the table are in decibels, and the “Quieter or Louder?” column indicates the relative noise level compared to other Roomba models.

Roomba’s Noise Levels on Various Surface Types: (Mystery Behind My Roomba’s Loudness)

Many Roomba users say that their Roomba is loud on hardwood floors.

That’s why I created a table that elaborates on the Noise levels that vary on each surface, here is the table of compression surfaces and noise levels in Decibels.

Surface TypeNoise Level (Decibels)
Hardwood60 dB
Laminate63 dB
Carpet65 dB
Tile62 dB

This table highlights any notable differences in noise levels based on the type of surface material.


To make Roomba less noisy, make sure to turn on “Quiet Drive” in the Roomba app and wipe down the filter. Don’t forget to keep the brushes and extractors in good shape, and if the vacuum fan is broken, replace it.

Now that you know why my Roomba is so loud, we hope you were able to keep your iRobot from making too much noise.

Since cleaning robots have such positive interactions with dirt and debris, it is highly advised to maintain Roomba clean all the time.


Why is my Roomba producing unusual voices?

Many users asked similar questions, like roomba making a loud screeching noise, roomba making a whining noise, and roomba making loud grinding noise.

How can I make my Roomba quieter?

Reducing Roomba noise involves cleaning or replacing parts like brushes, filters, and wheels, and enabling quiet drive if available.

What if my Roomba is still loud after troubleshooting?

If the noise persists, check the warranty for potential repairs or contact iRobot customer support for assistance.

The Answer for them is that loud screeching, whining, and grinding noises from a Roomba may indicate issues with the brushes, motor, or internal components. Contact customer support for troubleshooting and potential repairs.

Thanks For Visiting!

Related Articles:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *