"As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links"
Does your Roomba seem to be playing a sneaky game of hide-and-seek, like a Tom and Jerry with you?
If yes, you’re not alone if your Roomba stops charging after a few seconds.
You are lucky, as I’m going to tell you my exact experience and how I fixed the problem.
For me, it was simply cleaning the sensors, docks, and battery, and then a simple power cycle was enough to fix the problem.
But I’ve gathered some other reasons and their solutions as well. So, continue to read, and let’s make your cleaning routine wonderful again!
Why Does My Roomba Stop Charging After A Few Seconds?
There are different reasons why your “Roomba stops charging after a few seconds.” Here are some of the major ones;
- The charging connection may be affected if the charging contacts are covered with dirt, dust, or debris.
- The charging process could be stopped if the Roomba and the charging dock are not connected well or are loose.
- The Roomba’s battery may be defective, can’t charge, or die.
- Some Roombas have built-in safety features that stop charging if the temperature inside gets too high.
- Sometimes charging problems are caused by bugs in Roomba’s software or firmware.
- Roomba may not be charging properly, or there can be an issue with any internal components.
Discover ‘How Long Does A Roomba Take To Charge? in our detailed guide here.”
How To Fix Roomba Stops Charging After A Few Seconds Issue?
Here are some fixes to resolve your Roomba stops charging after a few seconds problem.
Solution 1: Try the Power Cycle
To power cycle your Roomba, perform the following:
- On your Roomba, search for the “Clean” button. Mostly, it is on top of the gadget.
- Keep the “Clean” button down for around 10 seconds. If the button is recessed, you may require a pen or similar object to push and hold the button.
- Roomba’s lights should blink off and on while you hold the button down. If you see this, it means the power cycle has started.
- After the Roomba’s LEDs turn off and back on, release the “Clean” button.
- Your Roomba should be turned off at this point. Press the “Clean” icon again to switch it back on after a brief delay.
“Find out ‘Why is My Roomba Making Clicking Noise‘ in our dedicated troubleshooting post.”
Solution 2: Clean The Charging Contacts
Here is how you can carefully clean your charging contacts;
- Make sure your Roomba is switched off and disconnected from the power supply.
- Check the Roomba’s charging dock and its charging connectors. These are the charging contacts, which are metal pins or connections.
- Wipe the Roomba and charging dock’s charging connections with a dry, clean cloth.
- Check to see that the charging connectors are not blocked with dirt. It’s important to watch for any buildup that might disrupt the connection.
Solution 3: Check The Battery And Power Adapter
Checking the battery and power adaptor is necessary as the problem could be, so follow the steps to conclude what the problem is:
- Examine the battery for any indications of damage, such as leakage or swelling. It may be required to replace the battery if it has been damaged.
- Ensure the battery is put in the Roomba properly and makes good contact.
- Check for frayed wires and other signs of damage on the power adapter. Don’t use it if it’s broken; get a suitable substitute.
- If the problem still occurs, try charging the Roomba straight from the power adapter instead of using the dock.
It will help figure out if the charging dock is causing the problem.
Solution 4: Use A Different Charging Dock
If the problem is with charging docks or your Roomba docking station is not working, then here are steps to fix the issue;
- If you can, get another charging dock that works with your Roomba or borrow one from someone you know who owns a Roomba.
- Join the cord from the power outlet to the supplementary charging dock.
- Try charging your Roomba on a different dock to see whether it charges without stopping after a few seconds.
- Roomba may have an issue with its primary Roomba not having a charging station, but if it charges reliably using the backup dock, it may be time to replace the dock.
Solution 5: Replace Your Roomba Battery
If your Roomba still doesn’t charge after you’ve changed the charging base, the problem may lie in the battery. It’s time to replace your Roomba battery if you’ve seen a significant drop in its battery life.
The replacement battery for your Roomba may be purchased at the manufacturer’s website or on Amazon. Roomba will repair the battery for free if you contact customer service while the brand’s guarantee still covers the device.
Solution 6: Clean Or Replace Dirty Sensors
The Roomba has several sensors, including inner/outer sensor ports that may get clogged with dirt or malfunction over time, four in-front cliff sensors, two bin sensors, two rear cliff sensors, and more.
A defective sensor may create issues that prevent Roomba from charging continuously, so cleaning the sensors using a dry cloth to ensure they detect infrared signals and can properly travel back to the dock for charging will help.
Solution 7: Reset the Roomba battery
To reset the Roomba, follow the steps below;
- Simply remove the roomba battery by removing the battery compartment.
- Turn off the charging dock by removing the power source.
- Disconnect the power source and the roomba battery for about 10 minutes.
- After the allotted time, reinsert the roomba battery and put it in its casing.
- Connect the charging cable or adapter to the dock.
- If the Roomba is not charging too soon, try charging it again and see if it fixes the problem.
Solution 8: Contact Irobot Customer Support
If your Roomba still won’t take charge after trying everything on this list, the charging station or a power component within your Roomba likely has a significant hardware fault you cannot resolve alone.
- For help, get in touch with iRobot’s support team.
Tips for Roomba battery maintenance – Quick Table of Tips
I have created a quick guideline tips table that describes the maintenance of Roomba batteries.
|Battery Maintenance Tips
|Avoid overcharging by disconnecting the charger once Roomba is fully charged
|Store your Roomba battery in a cool and dry environment.
|Clean the charging contacts regularly to ensure proper connection and charging efficiency.
|Perform a full discharge and recharge cycle every few months to optimize roomba battery performance.
It can be very perplexing when your Roomba stops charging after a few seconds. But there are some ways to resolve this problem.
Ensure the charging connections are clean and clear of junk on the Roomba and the charging station before you start. Consider using a different power connector, if available, to determine the possibility of a problem.
If the issue persists, contacting Roomba customer service will provide professional help to restore your Roomba’s charging reliability.
How do I know if dirty charging contacts are causing my Roomba’s charging issues?
Inspect the charging contacts on both Roomba and dock. If dirty, clean with a dry cloth and retry charging.
Can software bugs affect Roomba charging and how do I fix them?
Yes, software glitches can cause issues. Try resetting your Roomba or updating its firmware to resolve charging problems.
Why does my Roomba only charge when the app is open?
The reason for your question: why does my Roomba only charge when the app is open? This is due to your Roomba app settings not being configured properly or due to connectivity issues between Roomba and the app.
To resolve this, you should adjust app settings to allow charging in the background plus also check your Wi-Fi connection and troubleshoot any connectivity problems.
Thanks For Visiting!