"As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links"
If your roomba is not connected to your wifi, you can’t enjoy the most important features of your roomba.
You won’t be able to control your Roomba via smartphone and voice commands. More importantly, you won’t be able to pair your iRobot roomba with your smart home devices.
Although Roomba can function without wifi, the more advanced features need an internet connection.
Let’s explore why your roomba is not connecting to wifi and how you can fix this efficiently without any hassle.
You Might Also like to Read: How To Use Roomba Without WiFi?
“Your Roomba may not be able to connect to wifi if your roomba is using the wrong frequency, is too far away from the router, has no internet connection, or is already connected to another network.”
Make sure your Roomba is using the correct frequency, is close enough to the router, has an internet connection, and is not already connected to another network.
Why is my Roomba not connecting to wifi?
There are several potential causes for a Roomba to lose its wifi connection.
Weak signals, out-of-date software (your Roomba or network), and system faults fall under this category.
There are a number of additional possible causes, including interference from other electronics, improper network settings on the Roomba or router, or problems with the internet service provider.
You may be too distant from the router for the Roomba to detect it, or there may be a problem with the Roomba’s internal system.
|Electronic device interference
|Roomba's wireless connection might be disrupted by other electronics in the house.
|Poor router connection
|Your Roomba may have trouble connecting if the router's signal is poor.
|Distance Relative to Router
|Roomba performs best when it is in close proximity to your network; if it is too far away, the connection may be weak.
|Temporary system interruptions
|This problem may also be caused by temporary system faults or inaccurate login information.
|Software difficulties on either end may disrupt Roomba's ability to connect to a network, like outdated firmware.
How to Fix Roomba not connecting to wifi?
Here are some fixes for Roomba not connecting to Wi-Fi error:
Solution 1 Wi-Fi Router Restart
First, try restarting your wireless router. It might be your home’s wireless network equipment rather than the Roomba robot vacuum causing the issue.
After operating nonstop for many days, your wifi router may sometimes malfunction or hang. Your Wi-Fi router may reset and reconnect to the internet by just being restarted.
First, try rebooting your wifi router to see if Roomba can connect to the network thereafter.
- To disable the router, press its power button.
- The router must be unplugged.
- Do not re-plug it in for one full minute.
- Connect the router once again.
- The power button must be pressed.
- Give it some time to connect to the web and start working.
You might try connecting Roomba again after restarting your wifi router to see if it helps.
If your wifi router is malfunctioning, all your devices will be affected. Verify that no other devices are experiencing issues before diagnosing your wifi network.
Solution 2 Verify the Power Status of the Device
Roomba will only work if it is docked to and powered by the home base. Verify that the lights are on, too.
If it doesn’t work, reconnect after pressing the “clean” button. In addition, you may examine the power cords that link the charger to the base.
Solution 3 Verify Your Network Configuration
Most modern routers support dual-band (two separate 2.4 GHz and 5 GHz networks) or simultaneous broadcast of both 2.4 and 5 GHz networks under the same SSID.
If your network supports it, try switching from the 5 GHz setting to the 2.4 GHz setting to see if it helps with your Roomba model.
Keep in mind that Roomba will use the wireless connection of your mobile device automatically. You must first establish a connection to this network before proceeding with the installation.
Verify the configuration of your network once again using the router’s management interface;
1. Verify that the MAC address filter is turned off.
2. To disable Band steering, common in Mesh networks, disable it temporarily if you’re using a firewall.
3. Set your wifi to WPA or WPA2-PSK security and use a straightforward password with no unusual characters.
In order for your modifications to take effect, you must first reboot your router, then reconnect your mobile device, and last test the Roomba connection.
- Explore why your Roomba keeps stopping unexpectedly and how to fix it.
Solution 4 Verify that your wifi connection is stable
Get a smart gadget and go over to where the main base is. Now, let’s see whether you can use the web. If it isn’t connecting, it’s likely due to a problem with your wireless network.
If you want to check if your primary wifi router is getting internet service from your service provider, you may reboot it.
Solution. 5 Reboot All Your Devices
Your device’s network connection will be reset and refreshed after a reboot, erasing any temporary problems that may have been affecting it.
To begin, try restarting your modem/router. Pull the plug, wait 30 to 40 seconds, and then reconnect it to the wall. Let’s ramp up the intensity and get right in.
Next, turn on the Roomba again. Hold the “CLEAN BUTTON” for 20 seconds while the robot is docked and charging.
The last step is to restart the iRobot Home app. Start it up and make a connection.
Solution. 6 Verify That You Are In The Radius Of The Network
Your Roomba’s connection to the network will weaken the farther it is from the router. The power of your wifi signal decreases when it encounters concrete walls, metal, or other obstacles.
Make sure your router is located in a strategic spot and that the wifi signal can reach all areas of your home.
If you want the best possible internet connection for your Roomba, put its base in the same room as your router. An optimal home base distance is two to three feet from the router.
To prevent your Roomba from losing connection when cleaning a large area, a range extender may be necessary if your home’s network has dead spots.
Solution 7 Test Using a Different Network and Device
The Roomba’s ability to connect to your home network might be hindered by incompatibilities with your router. Switching to a different network might help you determine whether the problem is with your device or the network itself.
Therefore, try connecting your Roomba to a hotspot created by a different mobile device than the one running the iRobot app.
If you are able to connect, it means that your main network is malfunctioning. There might be an issue with your router’s settings or compatibility. In that case, I’d try resetting the router and creating a whole new network.
If you think your phone may be at fault, try setting up the robot on a different mobile device.
Solution 8 Reset Your Roomba
By resetting to factory settings, any faulty configuration files that could be preventing the whole wifi connection are deleted, and the original firmware is installed.
Pressing the correct button sequence to do a factory reset on your Roomba may vary according to the model you own.
- For the 900 Series, the lights should come on when you press and hold the “Dock,” “Spot clean,” and “Clean” buttons simultaneously.
- For the I series, hold down the “Home,” “Spot Clean,” and “Clean” buttons until the ring around the control panel glows white.
You may try reconnecting by opening the iRobot app again once you’ve reset it.
How to reconnect Roomba to the wifi network?
Before the setup procedure, ensure your Roomba has sufficient power by placing it on the charging station/dock.
The Wi-Fi settings of your Roomba may need to be reset if it was previously linked to a different Wi-Fi network or if you are setting it up for the first time.
Add the roomba with an existing account or create a new one, then choose your Roomba model and verify your wifi connection.
The app will try to link your Roomba to your wifi network. Choose your quick wifi network from the list and input the password.
Keep in mind that the precise procedures may change based on the Roomba type and Roomba app version you’re using.
You can find further information and troubleshooting advice on the manufacturer’s website or in Roomba’s user manual if you run into any problems.
- How does your Roomba decide when to stop cleaning? Find out now!
What are the wifi requirements for Roomba?
Some of the roomba models don’t support 5GHz of connectivity because they only require 2.4 GHz of connectivity.
For that, Roomba’s parent company, irobot, gave a proper table so you can know the requirements of your roomba.
Here is the table:
|Models below Roomba® 670
|Roomba® i6, i7, i8
These are the requirements of roomba in terms of frequency and connectivity.
It takes time and effort to fix the Roomba’s not connecting to wifi problems. Users may fix connection issues by checking for signal interference, moving closer to the router, installing new firmware, or adjusting network settings.
By embracing technology and completing the appropriate procedures, you can keep your Roomba linked to wifi at all times, allowing it to perform at its peak. Relax as you let your Roomba clean your smart home in style, knowing that it will maintain a consistent connection and go on as it always has.
Can I use roomba without wifi connectivity?
Yes, you can use your roomba without wifi connectivity, but you won’t be able to use some extra and interesting features that include controlling your roomba with voice command, controlling your roomba with an Application and more.
Thanks For Visiting!