Roomba Mapping Run

Roomba Mapping Run

"As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links"

Do you want to see a revolution in cleaning that will change how you care for your house forever? The Roomba Mapping Run will wow you as your new best cleaning friend.

Own any pets? It’s no sweat! Roomba Mapping Run is designed to handle even stubborn pet hair.

The Roomba Mapping Run is here to change how you take care of your home, giving you more time to focus on the things that matter. 

Therefore, take a seat, relax, and let this cleaning wonder take over. With the Roomba Mapping Run, cleaning will reach new heights for you.

You may also like to read: Roomba I1 Mapping Run

Roomba’s mapping feature is like your robot friend getting its bearings. It creates a digital map of your home so it can clean it efficiently and precisely. You can even customize the map and remap a room if needed. If Roomba ever has trouble saving the map, you can reset it. But don’t worry, your little robot friend will always be able to find its way back to your floors.

How to map the house with iRobot Roomba?

Roomba Mapping Run

If you choose not to use Mapping Runs, your robot will continue to map while it cleans as long as Smart Maps is turned on.

A Mapping Run is a mode whereby your robot will explore your house without cleaning anything, allowing it to go far longer between charges. The results of Roomba’s mapping run are detailed below.

Step 1: Making a Smart Map for irobot roomba

Your robot will become acquainted with your house by putting your Roomba i3/i4/i5 on a mapping run. You may start a mapping session by tapping the Map icon in the launch bar. 

To begin a mapping session, click the Map button to access the Maps list page and click the “+” in the upper right corner of the screen or the “Create New Map” card.

During a mapping run, your Roomba will only be interested in discovering your house and will not bother to clean the floors. When putting up your Roomba, choose a convenient and permanent spot for its charging station. 

A Clean Map report will be generated by your robot when the task is complete, detailing the locations it was able to locate and clean, as well as any areas where it discovered dirt or ran into problems.

A Smart Map may be created with only one successful mapping run. Without making any mistakes or needing any help from the user, the mapping-only run must begin and conclude at the Home Base or Clean Base.

If the mapping-only run is interrupted or the user needs to intervene, a new run must be started. After you’ve finished the mapping process, the program will allow you to make some adjustments to the map.

Step 2: Modifying the Map of your irobot roomba

You may begin changing the map when the robot has finished learning your house. The customization process includes room names, map viewing preferences, moveable walls, and labels. 

  • Click the map icon next to the robot picture on the home screen to access your Smart Map and make changes.

Giving Your Map a Name to your irobot roomba

The first step in making a personalized map is giving it a name. You’ll be asked to name your map throughout the personalization phase. It is how you’ll recognize your map inside the application. Give this plotted area a meaningful moniker.

  • At any time, by choosing a map and then clicking the overflow menu at the upper right of the map, you may change the name of the map.

Pick Orientation for your irobot roomba 

The position of your dock will influence the direction in which your map reads. For a map spin:

To change the orientation of your map, you may either tap the 90-degree rotation button on the left side of the screen or use the two-finger rotation technique.

After making adjustments to your Smart Map, if you decide you’d want to switch to a different orientation view, you may do so without losing your previous settings. 

This is how?

  • You may rotate your Smart Map 90 degrees by pressing the dedicated button or using the two-finger approach.
  • Tap the three dots (…) in the right corner on top of the display. It will open a menu where you may manage your map.
  • You may confirm the intended rotation by clicking the “Save Map Orientation” button.
  • The stored orientation will be used as the default view whenever you access the map.
  • If no rotation changes have been made to the map, “Save Map Orientation” will stay disabled.

Set up rooms for your irobot roomba

The next stage in making your unique map is to define your rooms. Your robot has made an educated prediction as to how your house ought to be partitioned based on the geometry it has seen. 

It is merely an approximation and may be adjusted to fit the specifics of your house.

  • Once your rooms have been set, your robot will keep them in memory and utilize them throughout the whole product experience.

Room dividers allow you to create any layout in your house by moving, adding, or removing walls.

At first, you’ll have someone walk you through the steps. Any preexisting partition may be moved (by dragging the map), rotated, or removed with a single tap. Save your work after you’re done with that partition.

  • Proceed in this manner until all of the rooms in your house are arranged as desired.
  • Room dividers may be updated at any time by selecting “Room dividers” from the Smart Map’s sidebar.

Label the Areas for your roomba 

Once you’ve segmented your floor plan into rooms, you can assign cleaning tasks to particular sections in whatever order you choose (through Alexa or Google Assistant) by giving them a name in the room list.

  • You may choose from a selection of generic names (like Bill’s bedroom) or provide your own.

Step 3: Clean up another floor of your house without making a new plan

Roomba Mapping Run

Set your robot to the Clean Everywhere task if you want it to clean a different room or floor of your house than the one you mapped. When doing a Clean Everywhere mission, your robot does not need to leave its charging station.

Tips for correctly mapping your house with irobot roomba 

Before releasing your robot out on mapping duty, conducting a little clean-up is a good idea. 

  • Clear the floor of any debris that may entangle the robot, put away any shoes that would prohibit it from entering particular locations, and make sure the machine can move freely over all surfaces.
  • Remember to leave the doors open to any rooms you want the Roomba to clean in the future or right now.
  • The Roomba is less likely to become confused and produce an erroneous map if charged before the mapping process begins. 
  • Remember that zigzagging and clumsy moves are par for the course as Hoover maps your environment and that things will smooth out as it gets the hang of things. 
  • However, don’t be scared to erase your map and start again if you feel that your robot vacuum is missing huge sections of your room or isn’t cleaning adequately.

Why isn’t Roomba saving the map?

If your Roomba is having trouble preserving its map, relocating it during the mapping or cleaning process might be to blame. However, there may be further explanations.

Read Also: Why Does My Roomba Keep Cleaning The Same Area?

Low battery levels

If you want accurately saved maps from your Roomba, it has to be fully charged. Keep an eye on the battery life and charge it up when it gets low.

Poor settings

Your current mapping preferences may be at fault if you’re experiencing difficulties. Verify that your Roomba’s configuration is accurate and that no settings are at odds with one another.

Obstacles in the path

To do its job, your Roomba needs clear routes. It won’t be able to make a precise map if there are obstacles in its way. Make sure the route of the vacuum is clear.

Also, make sure you check for software upgrades that might enhance your Roomba’s mapping skills regularly.

The optimal performance and accurate map saving of your Roomba may be ensured by keeping up with the latest software updates.

How Long Does Roomba Mapping Take?

You might wonder how long it takes for your Roomba to get a lay of the land. Well, it typically zips around on 3 to 5 missions to map out your home. This can vary because no two homes are alike some have more twists and turns, after all.

A little prep goes a long way. By clearing the clutter and propping open the doors, you help your Roomba learn the layout quickly. It’s like giving it a head start in a race against dirt.

This version aims to capture the essence of the mapping process in a friendly and relatable manner, emphasizing the practical steps users can take to facilitate their Roomba’s learning phase.

How long does it take for the Irobot to map the floor?

Roomba Mapping Run

According to iRobot, it only takes your Roomba 3-5 mapping runs to become familiar with your home’s layout. 

However, this estimate has some leeway based on the layout of your home and the number of obstacles Roomba must go through.

It took around 4 attempts to map Sweet Home accurately.


When the Roomba mapping run finishes, it’s not just cleaning the floors; it’s also changing how we think about doing housework. 

There is a peek at the future in the detailed mapping, the astute navigation, and the meticulous cleaning. 

Every time it runs, our Roomba not only cleans the floor but also transports us to a day when housework will be a breeze.

After the mapping mission is complete, we say goodbye to our robotic companion and enjoy the clean house and renewed optimism about the future of technological advancement.


How to troubleshoot when Roomba says? “map is not available”

If your Roomba says “map is not available”, you can try the following solution that can help you to resolve your troubleshooting problem:

  1. Check the mapping features (Settings > Map privacy > Mapping features).
  2. Check your Roomba’s WiFi connection. If it’s not connected, try connecting it again.
  3. Reset your Roomba if the map is still not available.

Guide to Fixing Roomba Wifi Connectivity Problems

How to create a virtual no-go zone on your Roomba?

Here is how you can set a boundary limit for your roomba that is known as a no-go zone for your Roomba.

  1. Open the Roomba app and tap on the map of your home.
  2. Tap on the + button and select Virtual Wall.
  3. Draw a line around the area that you don’t want your Roomba to clean.
  4. Tap on Save.

Your Roomba will now avoid the area that you’ve drawn.

Thanks For Visiting!

Related Articles:-

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *