Roomba Charging Error 19

Roomba Charging Error 19

"As an Amazon Associate, I earn from qualifying purchases. This post contains affiliate links"

Have there ever been any issues with charging your Roomba? Roomba Charging Error 19 is one of the most often reported problems, and it might prevent your robotic cleaner from working normally. 

As Roomba charging error 19 displays due to charging error, either the battery is not fully charged or improper installation of the battery.

But don’t be afraid! It can be fixed in easy ways, and I’m going to explain the cause of the problem and show you how to fix the problem.

Get ready to fix Roomba charging error 19 and charge your reliable vacuum without problems.

You Might Also like to Read: How Long Does A Roomba Take To Charge?

Why is My Roomba Showing On The Screen?

Charging Error 19 shows that the Roomba is already at the Home Base but cannot charge. Damaged or unmaintained charging connections are the most typical reason.

If you get error 19 when charging, it implies your battery has been plugged in for 240 minutes, but the charging process was interrupted before it was fully charged.

To avoid continuously using electricity and raising your energy bill, the Roomba’s battery time out and charging will automatically cease after 240 minutes.

The most probable cause of error 19 is improper battery installation, which prevents power from reaching the battery. 

How To Troubleshoot Roomba Charging Error 19?

Roomba Charging Error 19

The most recommended solution to fix the Roomba charging error 19 is to replace the battery. Here are some other troubleshooting steps to fix the issue:

Step 1: Inspect the Power Supply

Roomba Charging Error 19

Inspecting the power supply is an important step to do. Here’s how to do so:

  1. Ensure the power supply is securely attached to the charging station and the electrical outlet.
  2. Plug another device into the receptacle to test its functionality.
  3. Try another power cable or adapter to rule out supply problems if possible.
  4. If the issue still exists, consider contacting Roomba customer care for more guidance.

Step 2: Clean Charging Contacts

Roomba Charging Error 19

Roomba charging error 19 shows because the battery is not charging enough on the home base, but not every time. The problem is with the battery or charger but with charging contacts too.

So by Cleaning the charging contacts of Roomba, you can remove the error;

  1. First, ensure the Roomba is turned off, and the charging dock is unplugged.
  2. Wipe the Roomba and charging dock’s charging contacts with a gentle, dry cloth. Ensure that the contacts are free of grit, grime, and detritus.
  3. Connect the charging dock to the Roomba and switch it on.
  4. Attempt to charge the Roomba by placing it in the dock and see whether the issue persists.

Step 3: Check And Reinstall The Battery

Roomba Charging Error 19

The simplest and quickest solution to this problem is to reset the battery. If the battery in your Roomba isn’t fully charged or placed correctly, this error will be thrown.

When the battery is removed and reinstalled, it is a gentle reset that can resolve short-term system problems without demanding a manual restart.

Here’s how to reinstall the battery is as follows:

  1. You need to turn the Roomba around.
  2. To do this, unscrew every screw, including the one holding the rotating brush, and remove it.
  3. After that, remove and dispose of the bottom cover.
  4. To remove the battery, raise the two tabs.
  5. Wait ten to twenty seconds, then reinstall the battery.
  6. Put everything back together by repeating your steps.
  7. Check if the Roomba displays the same error after turning it back on.

Solution 4: Check Alignment and Docking

To fix the error, check the Roomba’s alignment and docking. Here’s how to do so:

  1. Make sure a solid, level surface is chosen for the charging dock.
  2. Verify that the guidance markings on the Roomba and the charging dock align. Ensure they are aligned correctly.
  3. Ensure the Roomba moves straight and centers as it reaches the charging port.
  4. After the charging indicator has lit up, the Roomba is ready to be docked. If it doesn’t fix the problem, try the next one.

Step 5: Power Reboot Your Vacuum

A power reboot is more effective and solves more than removing the battery. It enables the Roomba to reload the software. Rebooting is not equivalent to a factory refresh. It is identical to shutting off and then turning on a device.

Here’s how you can restart your Roomba:

  1. You can do so through the iRobot Home App or by touching the dock button manually. 
  2. In the Home app, this procedure is referred to as “force stop” and can be found in the preferences menu.
  3. For different Roomba models, you can restart the device like;
    • Roomba 500 and 600 Series: Hold the SPOT Clean and Dock button for 10 seconds.
    • Roomba 700, 800, and 900 Series: Hold down the CLEAN button on your robot for 10 seconds. Your Roomba will start up again when you let go of the button.
  • Roomba I and s Series: Hold down the CLEAN button for twenty seconds. The white light ring will rotate clockwise when the trigger is released.

Step 6: Factory Reset your Roomba

If none of the above fixes are successful, your Roomba may face a serious fault, such as a firmware problem. In this instance, a factory reset could resolve the issue.

Here’s how to return a Roomba to its factory settings:

  1. Launch the iRobot Home mobile application.
  2. Ensure your mobile device and Roomba are logged onto the same Wi-Fi connection.
  3. From the drop-down menu, select Settings.
  4. Select the option shown next to reset to factory settings.
  5. To finish this procedure, Roomba will restart automatically. For the time being, please be patient.

Remember that resetting will erase any previously saved configurations. To use the Roomba again, you must reconfigure it and map your home.

Step 7: Contact Customer Support

If you keep getting Roomba Charging Error 19 after all these solutions,call Roomba customer service for help.

They have specialized teams of professionals that can provide individualized advice and troubleshooting techniques unique to your Roomba model.

Contacting customer service, either over the phone, by email, or via their online help portal, will provide you with the most up-to-date and correct answers to your questions about billing.

How To Prevent Roomba Error 19?

You may prevent this error by carrying out the procedures listed below.

  • It’s important to ensure no debris around or around the Roomba’s home base. 
  • Ensure there is no Dual Mode Virtual Wall Barrier, Virtual Wall LighthouseTM, or another Home Base within 2.5m or 8ft of the Home Base when attempting to dock.
  • The Home Base ought to be set up next to a wall on a flat, firm surface. Ensure that the Roomba can easily return to its base. 
  • At least 4 feet or 1.2 meters should separate the Home Base from any stairs.
  • Check to see whether the starting place is clear of obstructions. 
  • The Roomba error 19 will not appear if you properly follow this advice.

FAQs’

Does Fixing Roomba Charging Error 19 Work For All Models?

Yes, all models of Roomba are compatible with the generic fixes offered for Roomba Charging Error 19. Review your Roomba’s user handbook or call customer service for model-specific advice.

Does The Roomba Error 19 Fall Under The Warranty?

The Roomba Error 19 warranty coverage depends on the manufacturer’s specific terms and conditions. You may be entitled to no-cost repairs or a replacement if your Roomba’s fault is not due to human error or unlawful adjustments.

Will Resetting My Roomba Affect Its Hardware?

No. Resetting is the easiest way to resolve software-related issues. Doing this might resolve any software problems you’re experiencing by returning the software on your Roomba to its factory default settings.

Conclusion

It’s upsetting when Roomba displays Roomba charging Error 19 during recharging, but with little troubleshooting expertise and practice, customers can fix the problem and get their robot vacuum back to work. 

You can lower the probability of this error by learning about its causes, applying practical remedies, and taking preventive actions. 

Maintaining your Roomba regularly and following professional best practices can ensure a trouble-free charging experience.

Thanks For Visiting!

Related Articles:

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *